Flat Glass Tempering Furnace with Convection System Glass Processing Machine

• Warranty: 1 Year
• Type: Glass Tempering Furnace
• Certification: CE, ISO, FDA, UR, PCI, PDA
• Structure: Horizontal
• Control System: PLC
• Glass Washing Machine Type: No
• Model NO.: STG-AQ1824-4B
• Glass Edging Machine Type: Tempering Furnace
• Grinding Head Number: No
• Condition: New
• After-sales Service: Provide
• Min.Glass Size: 200*350mm
• Glass Thickness Rage: 4-19mm
• Recommended Transformer Capacity: 500kVA
• Power Supplier Mode: 380V/50Hz
• Finish Product Rate: 98%
• Blower Control: Controlled by Frequency Inverters
• Quality Standard: ANSI Z97.1-2004
• Installation Period: 15 Working Days
• Commissioning Period: 7 Working Days
• Training Period: 1 Working Weeks
• Guarantee Period: One Year for Non Worn-out Parts and Components
• Transport Package: Seaworthy Package
• Specification: 1830 x 2440mm
• Trademark: FSSIDA
• Origin: China
• HS Code: 8475291900
• Production Capacity: 10sets/Year

Product Description

Description of the Equipment

1.1 Brief introduction

The furnace includes loading table, heating section with top forced air convection,quenching and

cooling section, unloading table, and control system. It is used to manufacture flat and bending

tempered glass for furniture, home appliance, architecture glass, etc.

1.2 Loading Table

The loading table is composed of rubber-covered rollers and Kevlar rope. When the glass is put

onto the rollers, the glass will be conveyed automatically to the entrance of the furnace where it

will be in ready-to-enter-furnace position and the rollers stop moving. It will send the glass into the
furnace once the computer control system gives enter command.

1.3 Heating Section

The structure of the heating section is of a double-layer box type covered with thermos-insulation

material. Inside the section there is a conveyor system with high temperature resistant ceramic

rollers. Heating elements and radiation plates are installed on the upper layer and lower layer of

this section. The upper layer radiation plate is special heat resistant and anti-corrosion cast

material. The heating element is of an integrated part with spiral type resistance erected on

ceramic part, it's easy to replace. When the glass is going to enter the furnace, the front door of

the heating section opens the rolls of the loading table and heating section move at the same

time. When the glass is in the furnace, the front door will close and the glass on the rollers will be

moved back and forth at the distance calculated by the controlling system automatically, so that

the glass will be heated evenly. The upper section can be lifted up for maintenance. The heating

elements are in matrix layout.

1.4 Flat Quenching/Cooling Section

The alloy sections and steel sheet is cold riveted to avoid deformation of heat welding, ensure

effectively the entire flatness at air face of quench. Rational nozzle aperture and arrangement of

air hole guarantee the glass even cooling. The upper and lower quenches are combined with

linkage and individual drives, which can actually control the rational height for air nozzle of

quenches. Matched with balance control of upper and lower air amount, the top and bottom of the

glasses can reach to optimum heat radiation, so as to ensure the flatness of tempering glass.

1.5 Unloading Table

The unloading table is the similar as the loading table. When the glass is transported to the end of

the conveyor, the rollers will stop, and the glass can be taken away by hand, or by robot, if there

is available at the customer's factory.

1.6 Control System

Technical Parts
Technical  Specifications

Model	STG-AB1824-4B
Flat Glass size	Max loading area	1830*2440mm
	Max Glass Size	1830*2440  5-19mm    1200*1800 4mm glass
	Min.Glass Size	250*300mm
	Glass thickness range	4-19mm
	Finish product rate	>=98%

Power consumption  
Flat: ≤4 kwh/M²  


Productivity:

Glass thickness(mm)	Glass tempered cycle(load/hour)	note
4(half charge)	20-22	The size, producing area and color of glass panel will cause the production difference. The production of glass plate with small size and deep color will be slightly larger.
5	16-18
6	14-16
8	10-12
10	9-10
12	7-8
15	5-6
19	3-4

Suitable glass sorts
Tinted glass
Patterned glass
Silk screen printing glass
Clear float glass
Low-e glass

Supply Scope

Loading table

Heating section(furnace)

Quenching and Cooling section

Unloading table

Associated electrical and control equipment

Blower system

Modem with long distance maintenance system

AC Battery Emergency driving system

Long-distance trouble maintenance

matrix heating system for evenness heating in the heating furnace

Controlling System

The whole control procedure, software of industrial computer and PLC are developed by

Foshan Star Glass Machinery Co., Ltd. The owner of all intelligence property right.

Foshan Star Glass Machinery Co., Ltd.. is responsible for the upgrading of the software

system.

PLC is SIMENS brand.

Industrial computer is ADVANTECH product from TAIWAN

Inverters are original  products for driving equivalent ones.

Equipment Structure & Manufacturing Standard photos

Sea worthy packing


Company Profile:

Founded in 2010, Foshan Star Glass Machinery Co., Ltd. is a high-tech enterprise specializing in the 
production, research and development and sales of glass deep processing machinery. The company is 
located in Foshan City, a major glass machinery center.
The company is committed to the production of glass radiant tempering furnace, convection tempering 
furnace, flat bending dual-purpose tempering furnace, automotive glass bending furnace, nonautoclave
PVB laminating production line.
After years of hard work and exploration, the company has obtained a number of national patents, and 
its technology is ahead of the domestic level. The products sell well all over China and are exported to 
Australia, the United States, the Middle East, India, Vietnam, South America and other places.
Companies adhering to the principle of quality first, service-oriented, and constantly improve the 
company's level and product quality, and strive to create a skilled, high-quality team. We will sincerely 
cooperate with new and old customers at home and abroad with sincerity and jointly develop the 
bright road of glass machinery manufacturing industry.

cooperation partner

After Sales Service

 

nExhibition

FAQ

1. who are we?
We are based in Guangdong, China, start from 2011,sell to South America(30.00%),Southeast Asia(20.00%),Mid East(15.00%),Eastern Europe(10.00%),Africa(10.00%),North America(10.00%),Western Europe(3.00%),Eastern Asia(2.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Glass Machine,Glass Furnace,Glass Bending Furnace,Glass Bending And Tempering Furnace,Glass Machines

4. why should you buy from us not from other suppliers?
Our company has a professional R & D team and a strict quality management system. 10 years of export experience. Mature after-sales installation team.

5. what services can we provide?
Accepted Delivery Terms: FOB,CIF,EXW,DDP;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Arabic,French,Russian