Flat Curved Curved Glass Tempered Furnace Glass Processing

• Customization: Available
• Certification: CE
• Control System: PLC Control, PLC
• Model NO.: STG-AB1536-3.5
• Glass Thickness Range: 3.5-12
• Maximum Glass Size: 1500*3600
• Warranty: One Year
• Structure: Horizontal
• Condition: New
• Type: No
• Glass Washing Machine Type: No
• Glass Edging Machine Type: No
• Grinding Head Number: No
• After-Sales Service: One Year
• Transport Package: Protective Film
• Trademark: Fssida
• Origin: China
• HS Code: 8464201000
• Production Capacity: 10sets/Month

Product Description

      

Description of the Equipment
 

1.1 Brief introduction

The furnace includes loading table, heating section , cross bending section, quenching and cooling section, unloading table, and control system. It is used to manufacture flat and bending tempered glass for furniture, home appliance, architecture glass, car side windows etc.

1.2 Loading Table

The loading table is composed of rubber-covered rollers and Kevlar rope. When the glass is put onto the rollers, the glass will be conveyed automatically to the entrance of the furnace where it will be in ready-to-enter-furnace position and the rollers stop moving. It will send the glass into the furnace once the computer control system gives enter command.

1.3 Heating Section

The structure of the heating section is of a double-layer box type covered with thermosinsulation material. Inside the section there is a conveyor system with high temperature resistant ceramic rollers. Heating elements and radiation plates are installed on the upper layer and lower layer of this section. The upper layer radiation plate is special heat resistant and anti-corrosion cast material. The heating element is of an integrated part with spiral type resistance erected on ceramic part, ifs easy to replace. When the glass is going to enter the furnace, the front door of the heating section opens the rolls of the loading table and heating section move at the same time. When the glass is in the furnace, the front door will close and the glass on the rollers will be moved back and forth at the distance calculated by the controlling system automatically, so that the glass will be heated evenly. The upper section can be lifted up for maintenance. The heating elements are in matrix layout.

1.4 Flat Quenching/Cooling Section

The alloy sections and steel sheet is cold riveted to avoid deformation of heat welding, ensure effectively the entire flatness at air face of quench. Rational nozzle aperture and arrangement of air hole guarantee the glass even cooling. The upper and lower quenches are combined with linkage and individual drives, which can actually control the rational height for air nozzle of quenches. Matched with balance control of upper and lower air amount, the top and bottom of the glasses can reach to optimum heat radiation, so as to ensure the flatness of tempering glass.

1.5 Passing Section

Passing technical is used to produce 4-5mm. On the basis of use of passing type technique, it can save the installation power and reduce the energy consumption. Ifs no need to open the bigger blower after the passing section. It can almost save 60% energy of the quenching.

1.6 Formation/Quenching (cross bending section)

It is composed of upper and lowers straight rollers. When the glass is transferred to this section, the upper and lower rollers will Change their shapes to form a curved clearance, which is just like an assumed mould. The softened glass sheets are oscillating in the assumed mould to be curved, and there is no mould needed. The bending section, tempering section and the formation section are just one combined part. The glass will be tempered during formation. When tempering flat glass, bending/tempering section is the same to a part of the flat blast heads. The glass will oscillate with the rollers for even quenching.

1.7Unloading Table

The unloading table is the similar as the loading table. When the glass is transported to the end of the conveyor, the rollers will stop, and the glass can be taken away by hand, or by robot, if there is available at the customer's factory.

1.8 Control System

1) Technical Parts

2) Technical Specifications
 

Model	STG-AB1536-35(Full quenching)
Flat Glass	Max loading area	1500 x 3600mm
	Min Glass size	400x300mm
	Glass thickness range	3.5-12MM(Full quenching)
	Max glass size	1500 x 3600MM

 

Bend Glass	Max glass size		1500 x 3600MM
	Glass thickness		3.5-12MM
	The Min. Radius.		700MM
	Bend adjustment system		Bend adjustment by special type of Hydraulic system,for high accuracy bending.
	Parameter for Hydraulic		11KW,21Mpa
Heating methods	Radiation
Requested glass quality	A No visible bubbles, impurities; A Meet the national standards of high quality float glass; > Glass shall be beveling, edging, washing and dry;
Power	Heating	318KW
	Bend and fast pass area	280KW
	Cooling	90KW
	Transportation.	6KW
Recommended transformer capacity	>315KVA
Blower Control	controlled by frequency inverters
Quality Standard	ANSI Z97.1-2004,
Finished product rate	>98%
Installation period (approximately,)	15 working days
Commissioning period (approximately)	10 working days
Training period (approximately)	10 working days
Guarantee period	ONE year for non worn-out parts and components.
Power supplier mode	220 V + 60 HZ 3phase

 

3) Power consumption
Flat: <4kwh/m2 (5mm sheet glass y)
Bend: <4.8 kwh/M2 (5mm sheet glassy)

Productivity:
 

Glass thickness (mm)		Glass tempered cycle. (Load/hour)	Note
FLAT GLASS	3.8	18-22	The size, producing area and color of glass panel will cause the production difference. The production of glass plate with small size and deep color will be slightly larger.
	5	16-18
	6	14-16
	8	10-12
	10	9-10
	12	7-8
BEND GLASS	3.8	40-45 PCS/Hour

 

 Suitable glass sorts:

• -Tinted glass
• -Patterned glass
• -Color glass
• -Silk screen printing glass
• -Clear float glass 2.3 Supply Scope
• -Loading table
• -Heating section(furnace) with top fan convection system
• -Fast pass area
• -Quenching and Cooling section
• -Bend forming section
• -Unloading table
• -Blower system
• -Control system

 

 

 

We make glass tempering furnace, glass edging machine, glass cutting machine, glass washing machine, glass drilling machine. Our company has more than 15 years.we have perfect after sales service and technology.contact with me if you have any request!